 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATASHEET Lighting Imaging Telecom Power Supplies HDPC-2 High Density Power Converter Military DC-DC Converter Description The PerkinElmer Optoelectronics DC-DC Converters, available in 1, 2 and 3 output configurations, offer military electronics designers outstanding flexibility in DC power distribution. The converters are small and lightweight, facilitating decentralized packaging. They can be PC-Board mounted near the load or installed in a centrally located, multiple output power supply. Their high-efficiency operation conserves power and simplifies thermal design, while delivering tightly regulated DC power under dynamic line and load conditions. Additional tailoring can be achieved through N+1 redundancy, paralleling and external synchronization. Features * High reliability * High efficiency * Fixed frequency switching * MIL-SPEC Design, Workmanship, Environments * Remote sense (Main output) * 5% Voltage adjust * External sync capability * Remote ON/OFF * Parallelable * Full-Mil components * Nuclear hardened * NAVMAT (Derating) * NAVMAT ESS * All Hermetic components * EMI Filter (additional filtering required for full MIL-STD-461 compliance) * Weight less than .35 lbs. * MTBF @ 100W single output configuration: * 315,000 hour MTBF +65C baseplate (Naval sheltered) * 82,000 hour MTBF +65C baseplate (Airborne, uninhabited, fighter) * 175,000 hour MTBF +65C baseplate (Ground, mobile) * 2,589,000 hour MTBF +25C baseplate (Ground, benign) * Custom inputs and outputs available . www.perkinelmer.com/opto HDPC-2 High Density Power Converter DC Input Voltage Characteristics Applicable Nominal Minimum Maximum Specs MIL-STD-704 28 155 270 18 100 125 50 250 440 MIL-STD-1275 MIL-STD-1399 MIL-STD-704 General Characteristics Isolation Operating Baseplate Temperature Range Efficiency (rated load) Reliability Prediction (single output configuration @ 100W, MIL-HDBK-217F) Input to output and to chassis: 1 A@ 750Vdc Output to chassis: 1 A@ 50Vdc -55C to +85C > 80% typical 124,000 hours MTBF, 65C baseplate, AUF 217,000 hours MTBF, 65C baseplate, GM 345,000 hours MTBF, 65C baseplate, NS 3,680,000 hours MTBF, 25C baseplate, GB DC Output Characteristics No. of Outputs Output No. Output Voltage 3.3V, 5V, 6V, Voltage Set Point Rated Power Current Limit, Max. 150% VO +/- 1% up to 150W of rated current 62W VO +/- 1% VO +/- 1% VO +/- 1% note (1) VO +/- 1% note (1) VO +/- 1% note (1) 62W 62W 62W 77W note (2) 24W ea. note (2) 65W note (2) 30W ea. note (2) 50W note (2) 38W ea. note (2) 5.0A 5.0A 7.8A 7.8A 38.0A 3.0A 38.0A 3.0A 38.0A 3.0A 2% P-P,rated load 110%-135%VO 110%-135%VO 110%-135%VO 110%-135%VO 110%-135%VO 3.0%VO 3.0%VO 0.5%VO cross regulated Ripple & Noise (0-20 MHz) Overvoltage Protection Load Regulation (No load to rated load) Line Regulation 1 1 12V, 15V, 28V and 40V 2% P-P,rated load 110%-135%VO 0.5%VO 0.5%VO 1 2 +15V -15V +12V -12V 5V +/-12V 5V +/-15V 5V +/-19V 3.0%VO 3.0%VO 0.5%VO cross regulated 2 1 2 1 2&3 1 2% P-P,rated load 2% P-P,rated load 4% P-P,rated load2% P-P,rated load 4% P-P,rated load2% P-P,rated load 4% P-P,rated load 3 0.5%VO cross regulated 0.5%VO cross regulated 2&3 1 2&3 0.5%VO cross regulated 0.5%VO cross regulated Notes: (1) Output Nos. 2 and 3 track in proportion to Output No. 1 (2) Output No. 1 has a 2.0 Amp minimum load; Outputs Nos. 2 and 3 have a minimum load of 0.3 Amp. Outputs Nos. 2 and 3 are isolated and parallelable. Maximum combined output for Outputs Nos. 1, 2 and 3 is 125 W. Outline Dimensions 4.60 O.080 PIN 2 PL O.040 PIN 8 PL O.156 (#6-32 INSERTS OPTIONAL) Other DC Output Characteristics Output Transient Response (50% step load, normal line) Line Transient Response (min. to max. line) Turn-on/off Time (Power on/off and Remote on/off) Output Adjust Parallel Operation Current Sharing Output Sense Range Temperature Drift (average over operating range) <150 Sec; Max Excursion 10%VO <150 Sec; Max Excursion 5%VO 10 mSec 5% nominal VO 10% rated load - Output 1 0.5Vdc from nominal - Output 1 0.02% VO/C - Output 1 LC810 -IN PARALLEL 2.00 SYNC ON/OFF +IN -V OUT 1.750 -V SENSE 1.500 1.40 .05 +V OUT .250 .70 .40 1.00 V ADJ +V SENSE CUST PIN PERKINELMER PIN INPUT DC DATE CODE SERIAL NO .95 2.300 3.25 3.450 For more information email us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto Note: All specifications subject to change without notice. .510 .007 1.150 .275 125 USA: PerkinElmer Optoelectronics 1330 E. Cypress St. Covina, CA 91724 P: (626) 967-9521 F: (626) 967-3151 . (c) 2001 PerkinElmer, Inc. All rights reserved. DS-241 Rev A 0901 www.perkinelmer.com/opto |
Price & Availability of HDPC-2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |